{"title":"Bottom brackets","description":"All CYCLEPOWER-COMPONENTS bottom brackets have been developed with the aim of maximising durability and the associated reliability. By this we mean the highest possible mileage with no or minimum maintenance. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor this reason, all CYCLEPOWER-COMPONENTS bottom brackets are sealed to mechanical engineering standards against external influences that occur on the bicycle; these are water, dirt and dust, which can subsequently clog the rolling bearings and lead to premature bearing wear. \u003cbr data-mce-fragment=\"1\"\u003eOur bottom brackets are also designed in such a way that they can be washed down with standard high-pressure water cleaners without the risk of damaging the bearings.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eA large number of variants enable use on different types of bicycles and frames. While the \u003cstrong\u003ePress-Fit 30\u0026nbsp;BB-standard\u003c\/strong\u003e (Ø 46mm bottom bracket shell bore) is generally used in the road bike and gravel sector, where the bearing shells are pressed in, the \u003cstrong\u003eT47 variant\u003c\/strong\u003e also meets the latest installation standard with M47x1 thread. \u003cbr data-mce-fragment=\"1\"\u003eThanks to the flexible design of the bottom bracket, we can cover all installation widths of bottom bracket shells on the market. Starting at \u003cstrong\u003e68mm\u003c\/strong\u003e, which is more common in road and gravel bikes, to \u003cstrong\u003e73mm\u003c\/strong\u003e for classic mountain bikes, to \u003cstrong\u003e85.5 or 86.5mm\u003c\/strong\u003e, which are used by newer road bike or MTB models, to fat bike\u0026nbsp;BB-widths of \u003cstrong\u003e121 or 132mm\u003c\/strong\u003e, we have a wide range of bottom bracket options.","products":[{"product_id":"cyclepower-press-fit-30-innenlager-86-5","title":"Press-Fit 30 bottom bracket 86.5","description":"\u003cli\u003eExceptional dirt and water resistance compared to other bottom brackets on the market for road and gravel bikes\u003c\/li\u003e\n\u003cli\u003egrinding\u0026nbsp;surfaces of the seals for the best possible, permanent sealing function against dirt, water and electrolyte drinks, which can clog the bearings and lead to bearing damage in a very short time.\u003c\/li\u003e\n\u003cli\u003eMaintenance-free,\u0026nbsp;a bicycle lifetime long\u003c\/li\u003e\n\u003cli\u003ePreload sleeve for transmitting axial preload forces through the pedal crank and sealing the roller bearings from the inside. This means that there is no longer any risk of excessively preloaded\u0026nbsp;bearings\u0026nbsp;inside the bottom bracket,\u0026nbsp;which can lead to\u0026nbsp;premature bearing wear or even damage.\u003c\/li\u003e\n\u003cli\u003ewithstands bike cleaning with high-pressure water cleaners (60°C, 100 bar water pressure, 40 cm distance to the lance) without any problems\u003c\/li\u003e\n\u003cli\u003ecompatible with Ø 30mm crankshafts and commercially available cranks such as FSA, Rotor, Aerozine etc.)\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003esuitable for bottom bracket shells according to the \u003cspan style=\"text-decoration: underline;\"\u003ePressFit 30 standard with bore Ø 46mm and 86.5mm width\u003c\/span\u003e.\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003edeveloped, tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/s!AmSZpeacI2UyzXsaORtZ90Whdwi_?e=Y6Dfa5\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUser manual\u003c\/a\u003e\u003c\/li\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":47189638873422,"sku":"","price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":47189638807886,"sku":"","price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":47189638775118,"sku":"","price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":47189638840654,"sku":"","price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":47194729382222,"sku":"","price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":47189638742350,"sku":"","price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/Innenlager-PF30x86.5_BK_1.jpg?v=1717349185"},{"product_id":"cyclepower-press-fit-30-innenlager-92","title":"Press-Fit 30 bottom bracket 92","description":"\u003cli\u003eExceptional dirt and water resistance compared to other bottom brackets on the market for MTN, gravel bikes\u003c\/li\u003e\n\u003cli\u003egrinding\u0026nbsp;surfaces of the seals for the best possible, permanent sealing function against dirt, water and electrolyte drinks, which can clog the bearings and lead to bearing damage in a very short time.\u003c\/li\u003e\n\u003cli\u003eMaintenance-free,\u0026nbsp;a bicycle lifetime long\u003c\/li\u003e\n\u003cli\u003ePreload sleeve for transmitting axial preload forces through the pedal crank and sealing the roller bearings from the inside. This means that there is no longer any risk of excessively preloaded\u0026nbsp;bearings\u0026nbsp;inside the bottom bracket,\u0026nbsp;which can lead to\u0026nbsp;premature bearing wear or even damage.\u003c\/li\u003e\n\u003cli\u003ewithstands bike cleaning with high-pressure water cleaners (60°C, 100 bar water pressure, 40 cm distance to the lance) without any problems\u003c\/li\u003e\n\u003cli\u003ecompatible with Ø 30mm crankshafts and commercially available cranks such as FSA, Rotor, Aerozine etc.\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003esuitable for bottom bracket shells according to the \u003cspan style=\"text-decoration: underline;\"\u003ePressFit 30 standard with bore Ø 46mm and 86.5mm width\u003c\/span\u003e.\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003edeveloped, tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/s!AmSZpeacI2UyzXsaORtZ90Whdwi_?e=Y6Dfa5\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUser manual\u003c\/a\u003e\u003c\/li\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":47194716963150,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":47194716897614,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":47194716864846,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":47194716930382,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":47665349656910,"sku":"","price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":47194716832078,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/DSC09276.jpg?v=1717348960"},{"product_id":"cyclepower-components-t47x30-innenlager-68","title":"T47x30 bottom bracket 68","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eextraordinary dirt and water resistance\u003c\/span\u003e compared to other bottom brackets on the market\u003c\/li\u003e\n\u003cli\u003esuitable for all types of bicycles (racing bikes, mountain bikes, trekking bikes, etc.) whose bottom brackets are designed according to the T47 standard.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBottom bracket housing width according to the article name\u003c\/span\u003e - the \u003cspan style=\"text-decoration: underline;\"\u003elast number\u003c\/span\u003e in this indicates the corresponding bottom bracket installation width in \u003cspan style=\"text-decoration: underline;\"\u003emillimeters\u003c\/span\u003e.\u003cbr\u003ee.g. 68 stands for 68mm or 121 for 121mm bottom bracket installation width.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrinded counter surfaces\u003c\/strong\u003e of the seals for the best possible, permanent sealing against dirt, water and leaking electrolyte drink, which clogs the roller bearings and can lead to bearing damage in a short time.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaintenance-free\u003c\/strong\u003e, for the life of the bike\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eA Preload sleeve\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eprevents strained ball bearings\u003c\/span\u003e of the BB itself and seals the roller bearings from the inner side of the bicycle frame.\u003cbr\u003eThis means there is no longer any danger of too strong pre-tensioned cranks in the bottom bracket, which can happen with some crank models and can lead to premature bearing damage.\u003c\/li\u003e\n\u003cli\u003eWithstands \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebicycle cleaning using\u0026nbsp;waterjet\u0026nbsp;cleaners\u003c\/span\u003e (60°C, 100 bar water pressure, 40 cm distance from the lance) without any problems\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with Ø \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e30mm crankshafts\u003c\/span\u003e and standard bicycle cranks such as FSA®, Shimano®, RaceFace® and many others. Not suitable for Campagnolo cranks.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003esuitable for\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebottom bracket shells according to the T47 standard\u003c\/span\u003e with M47x1 thread\u003c\/li\u003e\n\u003cli\u003edesigned according to mechanical engineering standards; tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/c\/3265239ce6a59964\/EWSZpeacI2UggDL7JgAAAAABtv-fyVDWFuU0s6a900dkDw?e=dxQrmO\" target=\"_blank\"\u003eInstructions for use\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":47194731315534,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":47194731348302,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":47194731381070,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"violet","offer_id":48172147802446,"sku":"","price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":47194731413838,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":47194731446606,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":47194731479374,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/T47x30-blau-68_front.jpg?v=1723996970"},{"product_id":"cyclepower-components-t47x24-innenlager-68","title":"T47x24 bottom bracket 68","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eextraordinary dirt and water resistance\u003c\/span\u003e compared to other bottom brackets on the market\u003c\/li\u003e\n\u003cli\u003esuitable for all types of bicycles (racing bikes, mountain bikes, trekking bikes, etc.) whose bottom brackets are designed according to the T47 standard.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBottom bracket housing width according to the article name\u003c\/span\u003e - the \u003cspan style=\"text-decoration: underline;\"\u003elast number\u003c\/span\u003e in this indicates the corresponding bottom bracket installation width in \u003cspan style=\"text-decoration: underline;\"\u003emillimeters\u003c\/span\u003e.\u003cbr\u003ee.g. 68 stands for 68mm or 121 for 121mm bottom bracket installation width.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrinded counter surfaces\u003c\/strong\u003e of the seals for the best possible, permanent sealing against dirt, water and leaking electrolyte drink, which clogs the roller bearings and can lead to bearing damage in a short time.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaintenance-free\u003c\/strong\u003e, for the life of the bike\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eA Preload sleeve\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eprevents strained ball bearings\u003c\/span\u003e of the BB itself and seals the roller bearings from the inner side of the bicycle frame.\u003cbr\u003eThis means there is no longer any danger of too strong pre-tensioned cranks in the bottom bracket, which can happen with some crank models and can lead to premature bearing damage.\u003c\/li\u003e\n\u003cli\u003eWithstands \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebicycle cleaning using\u0026nbsp;waterjet\u0026nbsp;cleaners\u003c\/span\u003e (60°C, 100 bar water pressure, 40 cm distance from the lance) without any problems\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with Ø \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e24 mm crankshafts\u003c\/span\u003e and standard bicycle cranks such as FSA®, Shimano®, RaceFace® and many others. Not suitable for Campagnolo cranks.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003esuitable for\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebottom bracket shells according to the T47 standard\u003c\/span\u003e with M47x1 thread\u003c\/li\u003e\n\u003cli\u003edesigned according to mechanical engineering standards; tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/c\/3265239ce6a59964\/EWSZpeacI2UggDL7JgAAAAABtv-fyVDWFuU0s6a900dkDw?e=dxQrmO\" target=\"_blank\"\u003eInstructions for use\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":47194738688334,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":47194738721102,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":47194738753870,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":47194738786638,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":47194738819406,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":47194738852174,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"violet","offer_id":48172240732494,"sku":"","price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/T47x24-blau-68-front.jpg?v=1723996435"},{"product_id":"aerozine-innenlager-bsa","title":"BSC bottom bracket","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"Box-sc-wfmb7k-0 sc-fcc6a6b0-0 beTSyX cEXEOH\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"Box-sc-wfmb7k-0\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"Box-sc-wfmb7k-0 sc-e43c8c17-1 hHsSgq\" data-testid=\"ad-description-Beschreibung\"\u003e\n\u003cul\u003e\n\u003cli\u003eAerozine bottom bracket for Hollowtech 2 cranks. It also fits RaceFace cranks or FSA and identical ones with\u0026nbsp;spindle Ø 24mm. For SRAM GXP or similar, an optional conversion kit would be necessary.\u003c\/li\u003e\n\u003cli\u003eHigh-quality CNC turned, anodized and laser engraved with sealed radial deep groove ball bearings\u003c\/li\u003e\n\u003cli\u003eFor bottom bracket installation width 73mm on MTB or 68mm on racing bike.\u003c\/li\u003e\n\u003cli\u003eThread Type: BSA\u003c\/li\u003e\n\u003cli\u003eScope of delivery: as shown, without spacer rings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AEROZINE","offers":[{"title":"black","offer_id":47598059159886,"sku":"","price":20.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":47598059192654,"sku":"","price":20.0,"currency_code":"EUR","in_stock":true},{"title":"blue","offer_id":47598059225422,"sku":"","price":20.0,"currency_code":"EUR","in_stock":true},{"title":"pink","offer_id":47598059258190,"sku":"","price":20.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/BB-05-XC-73_68-BK.jpg?v=1789040595"},{"product_id":"cyclepowre-press-fit-30-24-innenlager-68","title":"Press-Fit 30\/24 bottom bracket 68","description":"\u003cul\u003e\n\u003cli\u003eExceptional dirt and water resistance compared to commonly available\u0026nbsp;bottom brackets on the market for road and gravel bikes\u003c\/li\u003e\n\u003cli\u003eprecision made according to mechanical engineering standards\u003c\/li\u003e\n\u003cli\u003ethanks to innovative design and grinded counter surface\u0026nbsp;of the oil seals for best possible, permanent sealing function against dirt, water and electrolyte drinks, which can clog the bearings and lead to premature bearing wear or damage.\u003c\/li\u003e\n\u003cli\u003eMaintenance-free,\u0026nbsp;a bicycle lifetime long\u003c\/li\u003e\n\u003cli\u003ePreload sleeve for transmitting axial preload forces\u0026nbsp;caused by the pedal crank. Additionally the sleeve seals the roller bearings on the inner side. This means that there is no longer any risk of excessively preloaded\u0026nbsp;bearings\u0026nbsp;inside the bottom bracket,\u0026nbsp;which can lead to\u0026nbsp;premature bearing wear or even damage.\u003c\/li\u003e\n\u003cli\u003ewithstands bike cleaning with high-pressure water cleaners (60°C, 100 bar water pressure, 40 cm distance to the lance) without any problems\u003c\/li\u003e\n\u003cli\u003ecompatible with \u003cspan style=\"text-decoration: underline;\"\u003eØ 24mm\u0026nbsp;spindles\u003c\/span\u003e and commercially available cranks such as FSA, Rotor, Aerozine etc.)\u003c\/li\u003e\n\u003cli\u003esuitable for bottom bracket shells according to the \u003cspan style=\"text-decoration: underline;\"\u003ePressFit 30 standard with\u0026nbsp;Ø 46mm bore and 68mm shell width\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003edeveloped, tested and manufactured in Austria\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/s!AmSZpeacI2UyzXsaORtZ90Whdwi_?e=Y6Dfa5\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUser manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48106904224078,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48106904256846,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48106904289614,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48106904322382,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48106904355150,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48106904387918,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/CYCLEPOWER_Components_PF30x86_5_rot.jpg?v=1789040364"},{"product_id":"cyclepower-components-t47x30-innenlager-132","title":"T47x30 bottom bracket 132","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eextraordinary dirt and water resistance\u003c\/span\u003e compared to other bottom brackets on the market\u003c\/li\u003e\n\u003cli\u003esuitable for all types of bicycles (racing bikes, mountain bikes, trekking bikes, etc.) whose bottom brackets are designed according to the T47 standard.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBottom bracket housing width according to the article name\u003c\/span\u003e - the \u003cspan style=\"text-decoration: underline;\"\u003elast number\u003c\/span\u003e in this indicates the corresponding bottom bracket installation width in \u003cspan style=\"text-decoration: underline;\"\u003emillimeters\u003c\/span\u003e.\u003cbr\u003ee.g. 68 stands for 68mm or 121 for 121mm bottom bracket installation width.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrinded counter surfaces\u003c\/strong\u003e of the seals for the best possible, permanent sealing against dirt, water and leaking electrolyte drink, which clogs the roller bearings and can lead to bearing damage in a short time.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaintenance-free\u003c\/strong\u003e, for the life of the bike\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eA Preload sleeve\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eprevents strained ball bearings\u003c\/span\u003e of the BB itself and seals the roller bearings from the inner side of the bicycle frame.\u003cbr\u003eThis means there is no longer any danger of too strong pre-tensioned cranks in the bottom bracket, which can happen with some crank models and can lead to premature bearing damage.\u003c\/li\u003e\n\u003cli\u003eWithstands \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebicycle cleaning using\u0026nbsp;waterjet\u0026nbsp;cleaners\u003c\/span\u003e (60°C, 100 bar water pressure, 40 cm distance from the lance) without any problems\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with Ø \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e24 mm crankshafts\u003c\/span\u003e and standard bicycle cranks such as FSA®, Shimano®, RaceFace® and many others. Not suitable for Campagnolo cranks.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003esuitable for\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebottom bracket shells according to the T47 standard\u003c\/span\u003e with M47x1 thread\u003c\/li\u003e\n\u003cli\u003edesigned according to mechanical engineering standards; tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/c\/3265239ce6a59964\/EWSZpeacI2UggDL7JgAAAAABtv-fyVDWFuU0s6a900dkDw?e=dxQrmO\" target=\"_blank\"\u003eInstructions for use\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48121588351310,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48121588384078,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48121588416846,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48121588449614,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48121588482382,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48121588515150,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"violet","offer_id":48121592873294,"sku":"","price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/T47x30-gruen-132-front_6434e319-4f68-460a-a27b-648727d5e428.jpg?v=1724822117"},{"product_id":"cyclepower-press-fit-30-innenlager-68","title":"Press-Fit 30 bottom bracket 68","description":"\u003cul\u003e\n\u003cli\u003eExceptional dirt and water resistance compared to commonly available\u0026nbsp;bottom brackets on the market for road and gravel bikes\u003c\/li\u003e\n\u003cli\u003eprecision made according to mechanical engineering standards\u003c\/li\u003e\n\u003cli\u003ethanks to innovative design and grinded counter surface\u0026nbsp;of the oil seals for best possible, permanent sealing function against dirt, water and electrolyte drinks, which can clog the bearings and lead to premature bearing wear or damage.\u003c\/li\u003e\n\u003cli\u003eMaintenance-free,\u0026nbsp;a bicycle lifetime long\u003c\/li\u003e\n\u003cli\u003ePreload sleeve for transmitting axial preload forces\u0026nbsp;caused by the pedal crank. Additionally the sleeve seals the roller bearings on the inner side. This means that there is no longer any risk of excessively preloaded\u0026nbsp;bearings\u0026nbsp;inside the bottom bracket,\u0026nbsp;which can lead to\u0026nbsp;premature bearing wear or even damage.\u003c\/li\u003e\n\u003cli\u003ewithstands bike cleaning with high-pressure water cleaners (60°C, 100 bar water pressure, 40 cm distance to the lance) without any problems\u003c\/li\u003e\n\u003cli\u003ecompatible with \u003cspan style=\"text-decoration: underline;\"\u003eØ 30mm\u0026nbsp;spindles\u003c\/span\u003e and commercially available cranks such as FSA, Rotor, Aerozine etc.)\u003c\/li\u003e\n\u003cli\u003esuitable for bottom bracket shells according to the \u003cspan style=\"text-decoration: underline;\"\u003ePressFit 30 standard with\u0026nbsp;Ø 46mm bore and 68mm shell width\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003edeveloped, tested and manufactured in Austria\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48171617485134,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48171617681742,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48171617747278,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48171617780046,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48171617812814,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48171617845582,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/DSC06619_40300cab-9a54-46f7-a09a-5c1c4abcfecd.jpg?v=1716610425"},{"product_id":"cyclepower-components-t47x30-innenlager-85-5","title":"T47x30 bottom bracket 85.5","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eextraordinary dirt and water resistance\u003c\/span\u003e compared to other bottom brackets on the market\u003c\/li\u003e\n\u003cli\u003esuitable for all types of bicycles (racing bikes, mountain bikes, trekking bikes, etc.) whose bottom brackets are designed according to the T47 standard.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBottom bracket housing width according to the article name\u003c\/span\u003e - the \u003cspan style=\"text-decoration: underline;\"\u003elast number\u003c\/span\u003e in this indicates the corresponding bottom bracket installation width in \u003cspan style=\"text-decoration: underline;\"\u003emillimeters\u003c\/span\u003e.\u003cbr\u003ee.g. 68 stands for 68mm or 121 for 121mm bottom bracket installation width.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrinded counter surfaces\u003c\/strong\u003e of the seals for the best possible, permanent sealing against dirt, water and leaking electrolyte drink, which clogs the roller bearings and can lead to bearing damage in a short time.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaintenance-free\u003c\/strong\u003e, for the life of the bike\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eA Preload sleeve\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eprevents strained ball bearings\u003c\/span\u003e of the BB itself and seals the roller bearings from the inner side of the bicycle frame.\u003cbr\u003eThis means there is no longer any danger of too strong pre-tensioned cranks in the bottom bracket, which can happen with some crank models and can lead to premature bearing damage.\u003c\/li\u003e\n\u003cli\u003eWithstands \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebicycle cleaning using\u0026nbsp;waterjet\u0026nbsp;cleaners\u003c\/span\u003e (60°C, 100 bar water pressure, 40 cm distance from the lance) without any problems\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with Ø \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e30mm crankshafts\u003c\/span\u003e and standard bicycle cranks such as FSA®, Hope®, RaceFace® and many others. Not suitable for Campagnolo cranks.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003esuitable for\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebottom bracket shells according to the T47 standard\u003c\/span\u003e with M47x1 thread\u003c\/li\u003e\n\u003cli\u003edesigned according to mechanical engineering standards; tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/c\/3265239ce6a59964\/EWSZpeacI2UggDL7JgAAAAABtv-fyVDWFuU0s6a900dkDw?e=dxQrmO\" target=\"_blank\"\u003eInstructions for use\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48172151570766,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48172151603534,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48172151636302,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48172151669070,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48172151701838,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48172151734606,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"violet","offer_id":48172151767374,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/DSC08573.jpg?v=1717175324"},{"product_id":"cyclepower-components-t47x30-innenlager-121","title":"T47x30 bottom bracket 121","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eextraordinary dirt and water resistance\u003c\/span\u003e compared to other bottom brackets on the market\u003c\/li\u003e\n\u003cli\u003esuitable for all types of bicycles (racing bikes, mountain bikes, trekking bikes, etc.) whose bottom brackets are designed according to the T47 standard.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBottom bracket housing width according to the article name\u003c\/span\u003e - the \u003cspan style=\"text-decoration: underline;\"\u003elast number\u003c\/span\u003e in this indicates the corresponding bottom bracket installation width in \u003cspan style=\"text-decoration: underline;\"\u003emillimeters\u003c\/span\u003e.\u003cbr\u003ee.g. 68 stands for 68mm or 121 for 121mm bottom bracket installation width.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrinded counter surfaces\u003c\/strong\u003e of the seals for the best possible, permanent sealing against dirt, water and leaking electrolyte drink, which clogs the roller bearings and can lead to bearing damage in a short time.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaintenance-free\u003c\/strong\u003e, for the life of the bike\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eA Preload sleeve\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eprevents strained ball bearings\u003c\/span\u003e of the BB itself and seals the roller bearings from the inner side of the bicycle frame.\u003cbr\u003eThis means there is no longer any danger of too strong pre-tensioned cranks in the bottom bracket, which can happen with some crank models and can lead to premature bearing damage.\u003c\/li\u003e\n\u003cli\u003eWithstands \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebicycle cleaning using\u0026nbsp;waterjet\u0026nbsp;cleaners\u003c\/span\u003e (60°C, 100 bar water pressure, 40 cm distance from the lance) without any problems\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with Ø \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e30mm crankshafts\u003c\/span\u003e and standard bicycle cranks such as FSA®, Shimano®, RaceFace® and many others. Not suitable for Campagnolo cranks.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003esuitable for\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebottom bracket shells according to the T47 standard\u003c\/span\u003e with M47x1 thread\u003c\/li\u003e\n\u003cli\u003edesigned according to mechanical engineering standards; tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/c\/3265239ce6a59964\/EWSZpeacI2UggDL7JgAAAAABtv-fyVDWFuU0s6a900dkDw?e=dxQrmO\" target=\"_blank\"\u003eInstructions for use\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48172190859598,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48172190892366,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48172190925134,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48172190957902,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48172190990670,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48172191023438,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"violet","offer_id":48172191056206,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/T47x30-gruen-121-front_e867afdc-0fea-4b39-8f71-38332e452d86.jpg?v=1724822030"},{"product_id":"cyclepower-components-t47-24-innenlager-121","title":"T47x24 bottom bracket 121","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eextraordinary dirt and water resistance\u003c\/span\u003e compared to other bottom brackets on the market\u003c\/li\u003e\n\u003cli\u003esuitable for all types of bicycles (racing bikes, mountain bikes, trekking bikes, etc.) whose bottom brackets are designed according to the T47 standard.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBottom bracket housing width according to the article name\u003c\/span\u003e - the \u003cspan style=\"text-decoration: underline;\"\u003elast number\u003c\/span\u003e in this indicates the corresponding bottom bracket installation width in \u003cspan style=\"text-decoration: underline;\"\u003emillimeters\u003c\/span\u003e.\u003cbr\u003ee.g. 68 stands for 68mm or 121 for 121mm bottom bracket installation width.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrinded counter surfaces\u003c\/strong\u003e of the seals for the best possible, permanent sealing against dirt, water and leaking electrolyte drink, which clogs the roller bearings and can lead to bearing damage in a short time.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaintenance-free\u003c\/strong\u003e, for the life of the bike\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eA Preload sleeve\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eprevents strained ball bearings\u003c\/span\u003e of the BB itself and seals the roller bearings from the inner side of the bicycle frame.\u003cbr\u003eThis means there is no longer any danger of too strong pre-tensioned cranks in the bottom bracket, which can happen with some crank models and can lead to premature bearing damage.\u003c\/li\u003e\n\u003cli\u003eWithstands \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebicycle cleaning using\u0026nbsp;waterjet\u0026nbsp;cleaners\u003c\/span\u003e (60°C, 100 bar water pressure, 40 cm distance from the lance) without any problems\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with Ø \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e24 mm crankshafts\u003c\/span\u003e and standard bicycle cranks such as FSA®, Shimano®, RaceFace® and many others. Not suitable for Campagnolo cranks.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003esuitable for\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebottom bracket shells according to the T47 standard\u003c\/span\u003e with M47x1 thread\u003c\/li\u003e\n\u003cli\u003edesigned according to mechanical engineering standards; tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/c\/3265239ce6a59964\/EWSZpeacI2UggDL7JgAAAAABtv-fyVDWFuU0s6a900dkDw?e=dxQrmO\" target=\"_blank\"\u003eInstructions for use\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48172198986062,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48172199018830,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48172199051598,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"violet","offer_id":48172199182670,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48172199084366,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48172199117134,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48172199149902,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/T47x24-blau-121-front.jpg?v=1723996224"},{"product_id":"cyclepower-components-t47x24-innenlager-132","title":"T47x24 bottom bracket 132","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eextraordinary dirt and water resistance\u003c\/span\u003e compared to other bottom brackets on the market\u003c\/li\u003e\n\u003cli\u003esuitable for all types of bicycles (racing bikes, mountain bikes, trekking bikes, etc.) whose bottom brackets are designed according to the T47 standard.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBottom bracket housing width according to the article name\u003c\/span\u003e - the \u003cspan style=\"text-decoration: underline;\"\u003elast number\u003c\/span\u003e in this indicates the corresponding bottom bracket installation width in \u003cspan style=\"text-decoration: underline;\"\u003emillimeters\u003c\/span\u003e.\u003cbr\u003ee.g. 68 stands for 68mm or 121 for 121mm bottom bracket installation width.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrinded counter surfaces\u003c\/strong\u003e of the seals for the best possible, permanent sealing against dirt, water and leaking electrolyte drink, which clogs the roller bearings and can lead to bearing damage in a short time.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaintenance-free\u003c\/strong\u003e, for the life of the bike\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eA Preload sleeve\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eprevents strained ball bearings\u003c\/span\u003e of the BB itself and seals the roller bearings from the inner side of the bicycle frame.\u003cbr\u003eThis means there is no longer any danger of too strong pre-tensioned cranks in the bottom bracket, which can happen with some crank models and can lead to premature bearing damage.\u003c\/li\u003e\n\u003cli\u003eWithstands \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebicycle cleaning using\u0026nbsp;waterjet\u0026nbsp;cleaners\u003c\/span\u003e (60°C, 100 bar water pressure, 40 cm distance from the lance) without any problems\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with Ø \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e24 mm crankshafts\u003c\/span\u003e and standard bicycle cranks such as FSA®, Shimano®, RaceFace® and many others. Not suitable for Campagnolo cranks.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003esuitable for\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebottom bracket shells according to the T47 standard\u003c\/span\u003e with M47x1 thread\u003c\/li\u003e\n\u003cli\u003edesigned according to mechanical engineering standards; tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/c\/3265239ce6a59964\/EWSZpeacI2UggDL7JgAAAAABtv-fyVDWFuU0s6a900dkDw?e=dxQrmO\" target=\"_blank\"\u003eInstructions for use\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48172209373518,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48172209406286,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48172209439054,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"violet","offer_id":48172209570126,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48172209471822,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48172209504590,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48172209537358,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/T47x24-violett-132-front.jpg?v=1723996330"},{"product_id":"cyclepower-components-t47x24-innenlager-92","title":"T47x24 bottom bracket 92","description":"\u003cli\u003eExceptional dirt and water resistance compared to commonly available\u0026nbsp;bottom brackets on the market for MTN and gravel bikes\u003c\/li\u003e\n\u003cli\u003egrinded counter surface for oil sels to achieve\u0026nbsp;best possible, permanent sealing function against dirt, water and electrolyte drinks, which can clog the bearings and lead to premature bearing wear or damage.\u003c\/li\u003e\n\u003cli\u003eMaintenance-free,\u0026nbsp;a bicycle lifetime long\u003c\/li\u003e\n\u003cli\u003ePreload sleeve for transmitting axial preload forces\u0026nbsp;caused by the pedal crank. Additionally the sleeve seals the roller bearings on the inner side. This means that there is no longer any risk of excessively preloaded\u0026nbsp;bearings\u0026nbsp;inside the bottom bracket,\u0026nbsp;which can lead to\u0026nbsp;premature bearing wear or even damage.\u003c\/li\u003e\n\u003cli\u003ewithstands bike cleaning with high-pressure water cleaners (60°C, 100 bar water pressure, 40 cm distance to the lance) without any problems\u003c\/li\u003e\n\u003cli\u003ecompatible with \u003cspan style=\"text-decoration: underline;\"\u003eØ 30mm\u0026nbsp;spindle\u003c\/span\u003e and commercially available cranks such as Shimano, FSA, Rotor, Aerozine etc.\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003esuitable for bottom bracket shells according to the \u003cspan style=\"text-decoration: underline;\"\u003eT47\u0026nbsp;standard with\u0026nbsp;M47x1-thread\u0026nbsp;and 68mm shell width\u003c\/span\u003e.\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003edeveloped, tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/s!AmSZpeacI2UyzXsaORtZ90Whdwi_?e=Y6Dfa5\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUser manual\u003c\/a\u003e\u003c\/li\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48172246237518,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48172246270286,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48172246303054,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"violet","offer_id":48172246434126,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48172246335822,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48172246368590,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48172246401358,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/T47x24-violett-92-front.jpg?v=1723996817"},{"product_id":"cyclepower-components-t47x24-innenlager-85-5","title":"T47x24 bottom bracket 85.5","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eextraordinary dirt and water resistance\u003c\/span\u003e compared to other bottom brackets on the market\u003c\/li\u003e\n\u003cli\u003esuitable for all types of bicycles (racing bikes, mountain bikes, trekking bikes, etc.) whose bottom brackets are designed according to the T47 standard.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBottom bracket housing width according to the article name\u003c\/span\u003e - the \u003cspan style=\"text-decoration: underline;\"\u003elast number\u003c\/span\u003e in this indicates the corresponding bottom bracket installation width in \u003cspan style=\"text-decoration: underline;\"\u003emillimeters\u003c\/span\u003e.\u003cbr\u003ee.g. 68 stands for 68mm or 121 for 121mm bottom bracket installation width.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrinded counter surfaces\u003c\/strong\u003e of the seals for the best possible, permanent sealing against dirt, water and leaking electrolyte drink, which clogs the roller bearings and can lead to bearing damage in a short time.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaintenance-free\u003c\/strong\u003e, for the life of the bike\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eA Preload sleeve\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eprevents strained ball bearings\u003c\/span\u003e of the BB itself and seals the roller bearings from the inner side of the bicycle frame.\u003cbr\u003eThis means there is no longer any danger of too strong pre-tensioned cranks in the bottom bracket, which can happen with some crank models and can lead to premature bearing damage.\u003c\/li\u003e\n\u003cli\u003eWithstands \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebicycle cleaning using\u0026nbsp;waterjet\u0026nbsp;cleaners\u003c\/span\u003e (60°C, 100 bar water pressure, 40 cm distance from the lance) without any problems\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with Ø \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e24 mm crankshafts\u003c\/span\u003e and standard bicycle cranks such as FSA®, Shimano®, RaceFace® and many others. Not suitable for Campagnolo cranks.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003esuitable for\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebottom bracket shells according to the T47 standard\u003c\/span\u003e with M47x1 thread\u003c\/li\u003e\n\u003cli\u003edesigned according to mechanical engineering standards; tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/c\/3265239ce6a59964\/EWSZpeacI2UggDL7JgAAAAABtv-fyVDWFuU0s6a900dkDw?e=dxQrmO\" target=\"_blank\"\u003eInstructions for use\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48172281987406,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48172282020174,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48172282085710,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"violet","offer_id":48172282216782,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48172282118478,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48172282151246,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48172282184014,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/T47x24-gold-85.5-front_2.jpg?v=1723996700"},{"product_id":"cyclepower-components-t47x30-innenlager-92","title":"T47x30 bottom bracket 92","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eextraordinary dirt and water resistance\u003c\/span\u003e compared to other bottom brackets on the market\u003c\/li\u003e\n\u003cli\u003esuitable for all types of bicycles (racing bikes, mountain bikes, trekking bikes, etc.) whose bottom brackets are designed according to the T47 standard.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBottom bracket housing width according to the article name\u003c\/span\u003e - the \u003cspan style=\"text-decoration: underline;\"\u003elast number\u003c\/span\u003e in this indicates the corresponding bottom bracket installation width in \u003cspan style=\"text-decoration: underline;\"\u003emillimeters\u003c\/span\u003e.\u003cbr\u003ee.g. 68 stands for 68mm or 121 for 121mm bottom bracket installation width.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrinded counter surfaces\u003c\/strong\u003e of the seals for the best possible, permanent sealing against dirt, water and leaking electrolyte drink, which clogs the roller bearings and can lead to bearing damage in a short time.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaintenance-free\u003c\/strong\u003e, for the life of the bike\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eA Preload sleeve\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eprevents strained ball bearings\u003c\/span\u003e of the BB itself and seals the roller bearings from the inner side of the bicycle frame.\u003cbr\u003eThis means there is no longer any danger of too strong pre-tensioned cranks in the bottom bracket, which can happen with some crank models and can lead to premature bearing damage.\u003c\/li\u003e\n\u003cli\u003eWithstands \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebicycle cleaning using\u0026nbsp;waterjet\u0026nbsp;cleaners\u003c\/span\u003e (60°C, 100 bar water pressure, 40 cm distance from the lance) without any problems\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with Ø \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e30mm crankshafts\u003c\/span\u003e and standard bicycle cranks such as FSA®, Shimano®, RaceFace® and many others. Not suitable for Campagnolo cranks.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003esuitable for\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebottom bracket shells according to the T47 standard\u003c\/span\u003e with M47x1 thread\u003c\/li\u003e\n\u003cli\u003edesigned according to mechanical engineering standards; tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/c\/3265239ce6a59964\/EWSZpeacI2UggDL7JgAAAAABtv-fyVDWFuU0s6a900dkDw?e=dxQrmO\" target=\"_blank\"\u003eInstructions for use\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48172309741902,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48172309774670,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48172309807438,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48172309840206,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48172309872974,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48172309905742,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"violet","offer_id":48172309938510,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/DSC08594-fococlipping-HD_ffefb91a-cbb6-49aa-9ebe-7195412a217b.jpg?v=1716614302"},{"product_id":"cyclepower-press-fit-30-24-innenlager-86-5","title":"Press-Fit 30\/24 bottom bracket 86.5","description":"\u003cli\u003eExceptional dirt and water resistance compared to commonly available\u0026nbsp;bottom brackets on the market for road and gravel bikes\u003c\/li\u003e\n\u003cli\u003eprecision made according to mechanical engineering standards\u003c\/li\u003e\n\u003cli\u003ethanks to innovative design and grinded counter surface\u0026nbsp;of the oil seals for best possible, permanent sealing function against dirt, water and electrolyte drinks, which can clog the bearings and lead to premature bearing wear or damage.\u003c\/li\u003e\n\u003cli\u003eMaintenance-free,\u0026nbsp;a bicycle lifetime long\u003c\/li\u003e\n\u003cli\u003ePreload sleeve for transmitting axial preload forces\u0026nbsp;caused by the pedal crank. Additionally the sleeve seals the roller bearings on the inner side. This means that there is no longer any risk of excessively preloaded\u0026nbsp;bearings\u0026nbsp;inside the bottom bracket,\u0026nbsp;which can lead to\u0026nbsp;premature bearing wear or even damage.\u003c\/li\u003e\n\u003cli\u003ewithstands bike cleaning with high-pressure water cleaners (60°C, 100 bar water pressure, 40 cm distance to the lance) without any problems\u003c\/li\u003e\n\u003cli\u003ecompatible with \u003cspan style=\"text-decoration: underline;\"\u003eØ 24mm\u0026nbsp;spindles\u003c\/span\u003e and commercially available cranks such as FSA, Rotor, Aerozine etc.)\u003c\/li\u003e\n\u003cli\u003esuitable for bottom bracket shells according to the \u003cspan style=\"text-decoration: underline;\"\u003eBB386 standard with\u0026nbsp;Ø 46mm bore and 86,5mm shell width\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003edeveloped, tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/s!AmSZpeacI2UyzXsaORtZ90Whdwi_?e=Y6Dfa5\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUser manual\u003c\/a\u003e\u003c\/li\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48172358041934,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48172358074702,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48172358107470,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48172358140238,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48172358173006,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48172358205774,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/Innenlager-PF30_24x86.5_BK_1.jpg?v=1717317546"},{"product_id":"cyclepower-press-fit-30-innenlager-121","title":"Press-Fit 30 bottom bracket 121","description":"\u003cul\u003e\n\u003cli\u003eExceptional dirt and water resistance compared to commonly available\u0026nbsp;bottom brackets on the market for fat bikes\u003c\/li\u003e\n\u003cli\u003eprecision made according to mechanical engineering standards\u003c\/li\u003e\n\u003cli\u003ethanks to innovative design and grinded counter surface\u0026nbsp;of the oil seals for best possible, permanent sealing function against dirt, water and electrolyte drinks, which can clog the bearings and lead to premature bearing wear or damage.\u003c\/li\u003e\n\u003cli\u003eMaintenance-free,\u0026nbsp;a bicycle lifetime long\u003c\/li\u003e\n\u003cli\u003ePreload sleeve for transmitting axial preload forces\u0026nbsp;caused by the pedal crank. Additionally the sleeve seals the roller bearings on the inner side. This means that there is no longer any risk of excessively preloaded\u0026nbsp;bearings\u0026nbsp;inside the bottom bracket,\u0026nbsp;which can lead to\u0026nbsp;premature bearing wear or even damage.\u003c\/li\u003e\n\u003cli\u003ewithstands bike cleaning with high-pressure water cleaners (60°C, 100 bar water pressure, 40 cm distance to the lance) without any problems\u003c\/li\u003e\n\u003cli\u003ecompatible with \u003cspan style=\"text-decoration: underline;\"\u003eØ 30mm\u0026nbsp;spindles\u003c\/span\u003e and commercially available cranks such as FSA, Rotor, Aerozine etc.)\u003c\/li\u003e\n\u003cli\u003esuitable for bottom bracket shells according to the \u003cspan style=\"text-decoration: underline;\"\u003ePressFit 30 standard with\u0026nbsp;Ø 46mm bore and 121mm shell width\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003edeveloped, tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/s!AmSZpeacI2UyzXsaORtZ90Whdwi_?e=Y6Dfa5\" target=\"_blank\"\u003eUser manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48172422037838,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48172422070606,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48172422103374,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48172422168910,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48172422201678,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48172422234446,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/DSC09275.jpg?v=1717318873"},{"product_id":"cyclepower-press-fit-30-innenlager-132","title":"Press-Fit 30 bottom bracket 132","description":"\u003cli\u003eExceptional dirt and water resistance compared to commonly available\u0026nbsp;bottom brackets on the market for fat bikes\u003c\/li\u003e\n\u003cli\u003eprecision made according to mechanical engineering standards\u003c\/li\u003e\n\u003cli\u003ethanks to innovative design and grinded counter surface\u0026nbsp;of the oil seals for best possible, permanent sealing function against dirt, water and electrolyte drinks, which can clog the bearings and lead to premature bearing wear or damage.\u003c\/li\u003e\n\u003cli\u003eMaintenance-free,\u0026nbsp;a bicycle lifetime long\u003c\/li\u003e\n\u003cli\u003ePreload sleeve for transmitting axial preload forces\u0026nbsp;caused by the pedal crank. Additionally the sleeve seals the roller bearings on the inner side. This means that there is no longer any risk of excessively preloaded\u0026nbsp;bearings\u0026nbsp;inside the bottom bracket,\u0026nbsp;which can lead to\u0026nbsp;premature bearing wear or even damage.\u003c\/li\u003e\n\u003cli\u003ewithstands bike cleaning with high-pressure water cleaners (60°C, 100 bar water pressure, 40 cm distance to the lance) without any problems\u003c\/li\u003e\n\u003cli\u003ecompatible with \u003cspan style=\"text-decoration: underline;\"\u003eØ 30mm\u0026nbsp;spindles\u003c\/span\u003e and commercially available cranks such as FSA, Rotor, Aerozine etc.)\u003c\/li\u003e\n\u003cli\u003esuitable for bottom bracket shells according to the \u003cspan style=\"text-decoration: underline;\"\u003ePressFit 30 standard with\u0026nbsp;Ø 46mm bore and 132mm shell width\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003edeveloped, tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/s!AmSZpeacI2UyzXsaORtZ90Whdwi_?e=Y6Dfa5\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUser manual\u003c\/a\u003e\u003c\/li\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48172437897550,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48172437930318,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48172437963086,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48172437995854,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48172438028622,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48172438061390,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/Innenlager-PF30x132_BL_1.jpg?v=1717319130"},{"product_id":"cyclepower-press-fit-30-24-innenlager-92","title":"Press-Fit 30\/24 bottom bracket 92","description":"\u003cli\u003eExceptional dirt and water resistance compared to commonly available\u0026nbsp;bottom brackets on the market for MTN and gravel bikes\u003c\/li\u003e\n\u003cli\u003eprecision made according to mechanical engineering standards\u003c\/li\u003e\n\u003cli\u003ethanks to innovative design and grinded counter surface\u0026nbsp;of the oil seals for best possible, permanent sealing function against dirt, water and electrolyte drinks, which can clog the bearings and lead to premature bearing wear or damage.\u003c\/li\u003e\n\u003cli\u003eMaintenance-free,\u0026nbsp;a bicycle lifetime long\u003c\/li\u003e\n\u003cli\u003ePreload sleeve for transmitting axial preload forces\u0026nbsp;caused by the pedal crank. Additionally the sleeve seals the roller bearings on the inner side. This means that there is no longer any risk of excessively preloaded\u0026nbsp;bearings\u0026nbsp;inside the bottom bracket,\u0026nbsp;which can lead to\u0026nbsp;premature bearing wear or even damage.\u003c\/li\u003e\n\u003cli\u003ewithstands bike cleaning with high-pressure water cleaners (60°C, 100 bar water pressure, 40 cm distance to the lance) without any problems\u003c\/li\u003e\n\u003cli\u003ecompatible with \u003cspan style=\"text-decoration: underline;\"\u003eØ 24mm\u0026nbsp;spindles\u003c\/span\u003e and commercially available cranks such as FSA, Rotor, Aerozine etc.)\u003c\/li\u003e\n\u003cli\u003esuitable for bottom bracket shells according to the \u003cspan style=\"text-decoration: underline;\"\u003ePressFit 30 standard with\u0026nbsp;Ø 46mm bore and 92mm shell width\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003edeveloped, tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/s!AmSZpeacI2UyzXsaORtZ90Whdwi_?e=Y6Dfa5\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUser manual\u003c\/a\u003e\u003c\/li\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48172455067982,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48172455821646,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48172455985486,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48172456018254,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48172456051022,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48172456083790,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/Innenlager-PF30_24x92_BK_1.jpg?v=1717317765"},{"product_id":"cyclepower-press-fit-30-24-innenlager-121","title":"Press-Fit 30\/24 bottom bracket 121","description":"\n\u003cli\u003eExceptional dirt and water resistance compared to commonly available\u0026nbsp;bottom brackets on the market for fat bikes\u003c\/li\u003e\n\u003cli\u003eprecision made according to mechanical engineering standards\u003c\/li\u003e\n\u003cli\u003ethanks to innovative design and grinded counter surface\u0026nbsp;of the oil seals for best possible, permanent sealing function against dirt, water and electrolyte drinks, which can clog the bearings and lead to premature bearing wear or damage.\u003c\/li\u003e\n\u003cli\u003eMaintenance-free,\u0026nbsp;a bicycle lifetime long\u003c\/li\u003e\n\u003cli\u003ePreload sleeve for transmitting axial preload forces\u0026nbsp;caused by the pedal crank. Additionally the sleeve seals the roller bearings on the inner side. This means that there is no longer any risk of excessively preloaded\u0026nbsp;bearings\u0026nbsp;inside the bottom bracket,\u0026nbsp;which can lead to\u0026nbsp;premature bearing wear or even damage.\u003c\/li\u003e\n\u003cli\u003ewithstands bike cleaning with high-pressure water cleaners (60°C, 100 bar water pressure, 40 cm distance to the lance) without any problems\u003c\/li\u003e\n\u003cli\u003ecompatible with \u003cspan style=\"text-decoration: underline;\"\u003eØ 24mm\u0026nbsp;spindles\u003c\/span\u003e and commercially available cranks such as FSA, Rotor, Aerozine etc.)\u003c\/li\u003e\n\u003cli\u003esuitable for bottom bracket shells according to the \u003cspan style=\"text-decoration: underline;\"\u003ePressFit 30 standard with\u0026nbsp;Ø 46mm bore and 121mm shell width\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003edeveloped, tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/s!AmSZpeacI2UyzXsaORtZ90Whdwi_?e=Y6Dfa5\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUser manual\u003c\/a\u003e\u003c\/li\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48172497731918,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48172497764686,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48172497797454,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48172497830222,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48172497862990,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48172497895758,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/Innenlager-PF30_24x121_BK_1.jpg?v=1717318054"},{"product_id":"cyclepower-press-fit-30-24-innenlager-132","title":"Press-Fit 30\/24 bottom bracket 132","description":"\u003cli\u003eExceptional dirt and water resistance compared to commonly available\u0026nbsp;bottom brackets on the market for fat bikes\u003c\/li\u003e\n\u003cli\u003eprecision made according to mechanical engineering standards\u003c\/li\u003e\n\u003cli\u003ethanks to innovative design and grinded counter surface\u0026nbsp;of the oil seals for best possible, permanent sealing function against dirt, water and electrolyte drinks, which can clog the bearings and lead to premature bearing wear or damage.\u003c\/li\u003e\n\u003cli\u003eMaintenance-free,\u0026nbsp;a bicycle lifetime long\u003c\/li\u003e\n\u003cli\u003ePreload sleeve for transmitting axial preload forces\u0026nbsp;caused by the pedal crank. Additionally the sleeve seals the roller bearings on the inner side. This means that there is no longer any risk of excessively preloaded\u0026nbsp;bearings\u0026nbsp;inside the bottom bracket,\u0026nbsp;which can lead to\u0026nbsp;premature bearing wear or even damage.\u003c\/li\u003e\n\u003cli\u003ewithstands bike cleaning with high-pressure water cleaners (60°C, 100 bar water pressure, 40 cm distance to the lance) without any problems\u003c\/li\u003e\n\u003cli\u003ecompatible with \u003cspan style=\"text-decoration: underline;\"\u003eØ 24mm\u0026nbsp;spindles\u003c\/span\u003e and commercially available cranks such as FSA, Rotor, Aerozine etc.)\u003c\/li\u003e\n\u003cli\u003esuitable for bottom bracket shells according to the \u003cspan style=\"text-decoration: underline;\"\u003ePressFit 30 standard with\u0026nbsp;Ø 46mm bore and 132mm shell width\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003edeveloped, tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/s!AmSZpeacI2UyzXsaORtZ90Whdwi_?e=Y6Dfa5\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUser manual\u003c\/a\u003e\u003c\/li\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48172538102094,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48172538134862,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48172538167630,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48172538200398,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48172538233166,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48172538265934,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/Innenlager-PF30_24x132_BK_1.jpg?v=1717348911"},{"product_id":"kurbelwellenbeilagscheibe","title":"crankarm spindle washer","description":"\u003cul\u003e\n\u003cli\u003eSpacer for axial spacing of the crankshaft in the bottom bracket\u003c\/li\u003e\n\u003cli\u003eEffective reduction of axial play\u003c\/li\u003e\n\u003cli\u003eMade from black plastic\u003c\/li\u003e\n\u003cli\u003euniversally suitable for all bicycle cranks with corresponding shaft Ø such as Shimano, FSA, RaceFace, Aerozine, Rotor and others\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"24x1","offer_id":48341219803470,"sku":"","price":2.4,"currency_code":"EUR","in_stock":true},{"title":"24x1.5","offer_id":48341219836238,"sku":"","price":2.4,"currency_code":"EUR","in_stock":true},{"title":"30x1","offer_id":48341219737934,"sku":"","price":2.4,"currency_code":"EUR","in_stock":true},{"title":"30x1.5","offer_id":48341219770702,"sku":"","price":2.4,"currency_code":"EUR","in_stock":true},{"title":"30x2.5","offer_id":60503551770958,"sku":null,"price":2.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/DSC00200.jpg?v=1732529829"},{"product_id":"cyclepower-components-t47x24-innenlager-73","title":"T47x24 bottom bracket 73","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eextraordinary dirt and water resistance\u003c\/span\u003e compared to other bottom brackets on the market\u003c\/li\u003e\n\u003cli\u003esuitable for all types of bicycles (racing bikes, mountain bikes, trekking bikes, etc.) whose bottom brackets are designed according to the T47 standard.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBottom bracket housing width according to the article name\u003c\/span\u003e - the \u003cspan style=\"text-decoration: underline;\"\u003elast number\u003c\/span\u003e in this indicates the corresponding bottom bracket installation width in \u003cspan style=\"text-decoration: underline;\"\u003emillimeters\u003c\/span\u003e.\u003cbr\u003ee.g. 68 stands for 68mm or 121 for 121mm bottom bracket installation width.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrinded counter surfaces\u003c\/strong\u003e of the seals for the best possible, permanent sealing against dirt, water and leaking electrolyte drink, which clogs the roller bearings and can lead to bearing damage in a short time.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaintenance-free\u003c\/strong\u003e, for the life of the bike\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eA Preload sleeve\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eprevents strained ball bearings\u003c\/span\u003e of the BB itself and seals the roller bearings from the inner side of the bicycle frame.\u003cbr\u003eThis means there is no longer any danger of too strong pre-tensioned cranks in the bottom bracket, which can happen with some crank models and can lead to premature bearing damage.\u003c\/li\u003e\n\u003cli\u003eWithstands \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebicycle cleaning using\u0026nbsp;waterjet\u0026nbsp;cleaners\u003c\/span\u003e (60°C, 100 bar water pressure, 40 cm distance from the lance) without any problems\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with Ø \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e24 mm crankshafts\u003c\/span\u003e and standard bicycle cranks such as FSA®, Shimano®, RaceFace® and many others. Not suitable for Campagnolo cranks.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003esuitable for\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebottom bracket shells according to the T47 standard\u003c\/span\u003e with M47x1 thread\u003c\/li\u003e\n\u003cli\u003edesigned according to mechanical engineering standards; tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/c\/3265239ce6a59964\/EWSZpeacI2UggDL7JgAAAAABtv-fyVDWFuU0s6a900dkDw?e=dxQrmO\" target=\"_blank\"\u003eInstructions for use\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48383631524174,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48383631556942,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48383631589710,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"violet","offer_id":48383631720782,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48383631622478,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48383631655246,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48383631688014,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/T47x24-violett-73-front.jpg?v=1723996531"},{"product_id":"cyclepower-components-t47x30-innenlager-73","title":"T47x30 bottom bracket 73","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eextraordinary dirt and water resistance\u003c\/span\u003e compared to other bottom brackets on the market\u003c\/li\u003e\n\u003cli\u003esuitable for all types of bicycles (racing bikes, mountain bikes, trekking bikes, etc.) whose bottom brackets are designed according to the T47 standard.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBottom bracket housing width according to the article name\u003c\/span\u003e - the \u003cspan style=\"text-decoration: underline;\"\u003elast number\u003c\/span\u003e in this indicates the corresponding bottom bracket installation width in \u003cspan style=\"text-decoration: underline;\"\u003emillimeters\u003c\/span\u003e.\u003cbr\u003ee.g. 68 stands for 68mm or 121 for 121mm bottom bracket installation width.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrinded counter surfaces\u003c\/strong\u003e of the seals for the best possible, permanent sealing against dirt, water and leaking electrolyte drink, which clogs the roller bearings and can lead to bearing damage in a short time.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaintenance-free\u003c\/strong\u003e, for the life of the bike\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003eA Preload sleeve\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eprevents strained ball bearings\u003c\/span\u003e of the BB itself and seals the roller bearings from the inner side of the bicycle frame.\u003cbr\u003eThis means there is no longer any danger of too strong pre-tensioned cranks in the bottom bracket, which can happen with some crank models and can lead to premature bearing damage.\u003c\/li\u003e\n\u003cli\u003eWithstands \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebicycle cleaning using\u0026nbsp;waterjet\u0026nbsp;cleaners\u003c\/span\u003e (60°C, 100 bar water pressure, 40 cm distance from the lance) without any problems\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with Ø \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e30 mm crankshafts\u003c\/span\u003e and standard bicycle cranks such as FSA®, Hope®, RaceFace® and many others. Not suitable for Campagnolo cranks.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003esuitable for\u0026nbsp;\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003ebottom bracket shells according to the T47 standard\u003c\/span\u003e with M47x1 thread\u003c\/li\u003e\n\u003cli\u003edesigned according to mechanical engineering standards; tested and manufactured in Austria\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/1drv.ms\/b\/c\/3265239ce6a59964\/EWSZpeacI2UggDL7JgAAAAABtv-fyVDWFuU0s6a900dkDw?e=dxQrmO\" target=\"_blank\"\u003eInstructions for use\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"blue","offer_id":48383669469518,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"gold","offer_id":48383669502286,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":48383669535054,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"violet","offer_id":48383669666126,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":48383669567822,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":48383669600590,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":48383669633358,"sku":null,"price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/T47x30-violett-73-front.jpg?v=1723997089"},{"product_id":"t47-innenlagermontagewerkzeug","title":"T47 BB installation tool","description":"\u003cul\u003e\n\u003cli\u003especial tool for installation the cyclepower T47 bottom bracket\u003c\/li\u003e\n\u003cli\u003ecan be tightened with a 1\/2\" ratchet\/torque wrench or a 32mm open-end\/ring wrench\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CYCLEPOWER-COMPONENTS","offers":[{"title":"Default Title","offer_id":48517515805006,"sku":"","price":29.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/5447\/2526\/files\/DSC09883.jpg?v=1723996148"}],"url":"https:\/\/www.cyclepower-components.com\/en\/collections\/bottom-brackets.oembed?page=2","provider":"CYCLEPOWER-COMPONENTS","version":"1.0","type":"link"}