500 in stock
Couldn't load pickup availability
7005 aluminium square hollow section – high-strength aluminium for demanding structures
This 7005 aluminium square profile combines low weight with high strength and good fatigue resistance. EN AW-7005 is a high-strength AlZnMg alloy suited to lightweight engineering and mechanically stressed components where a high strength-to-weight ratio is required.
Benefits:
- High strength at low weight and excellent strength-to-weight ratio
- Suitable for dynamically loaded structures
- Good corrosion resistance
- Significantly stronger than common structural alloys such as 6060/6063
- Good machinability; can be anodised
- Suitable for welded structures; weldable by MIG or TIG
- Age-hardening; ideal for custom technical and lightweight constructions
The profile can be sawn, drilled, milled and mechanically machined. Suitable for prototypes, one-off parts and functional production components. Typical applications include bicycle frames, frames and reinforcements, mechanical engineering, fixtures, lightweight structures and custom technical constructions.
Material: EN AW-7005 / AlZn4.5Mg1 (composition below).
Temper: T6 (solution heat-treated and artificially aged).
Shape: square hollow profile with rounded corners.
- 20 × 20 mm:
- wall-thickness: 1.2 mm
- outer corner radius R4
- length 530 mm (cutting tolerance ±1 mm).
- 27 × 19 mm:
- wall-thickness: 1.3 mm
- outer corner radius R2
- length 490 mm (cutting tolerance ±1 mm).
Surface: mill-finish aluminium.
Alloy composition (mass %):
| Element | Range | Function |
| Zinc (Zn) | 4.0–5.0 | Primary strengthening element |
| Magnesium (Mg) | 1.0–1.8 | Supports MgZn₂ precipitate formation during strengthening |
| Manganese (Mn) | 0.20–0.70 | Strength, corrosion resistance and grain-structure stability |
| Chromium (Cr) | 0.06–0.20 | Grain-boundary stabilisation |
| Zirconium (Zr) | 0.08–0.20 | Grain refinement; reduces hot cracking after welding |
| Copper (Cu) | ≤0.10 | Kept low for weldability and corrosion resistance |
| Iron (Fe) | ≤0.40 | Impurity limit |
| Silicon (Si) | ≤0.35 | Impurity limit |
| Titanium (Ti) | 0.01–0.06 | Grain refiner |
| Other (each / total) | ≤0.05 / ≤0.15 | Trace-element limits |
| Aluminium (Al) | Balance to 100% |
