CYCLEPOWER-COMPONENTS

singlespeed conversion kit Shimano Microspline + cog

€96,00 EUR

Sale Sold out

Taxes included.

complete conversion kit to get started; just remove your cassette and install the conversion kit to ride single speed on your Shimano Microspline freehub.
anodized in various colors, laser etched graphics
easy to install - just two tools required:

Shimano HG cassette freewheel
Shimano Centerlock/bottom bracket wrench with 16 notches
Preferably a torque wrench is suggested.

in case of cog exchange, the conversion kit remains on the freehub
the conversion kit can carry Gates® Carbondrive sprockets with 13-splines (Rohloff standard) or any common chain sprockets with same torque transmission.
adjustable chainline
Minimum transmission ratio chainring to sprocket on the conversion kit: ≥2.0. This is calculated from the number of teeth on the chainring/pulley to the number of teeth on the sprocket/belt pulley as follows, for example: 46/20 = 2.3 or 39/24 = 1.625

Manual of this product

high-quality chain cog with 13-spline drive (Rohloff Carrier Standard)
Designed as a reversible cog - if one side is worn, simply turn it over and carry on riding. This increases the mileage even further!
hardened steel with a special surface coating to minimize friction and increase hardness, which in turn reduces wear.
specially developed tooth shape reliably prevents the chain from slipping when the pinion is worn out. In addition, the chain noise is reduced because the teeth engage with the chain more smoothly.
particularly durable - thanks to numerous improvements to many commercially available sprockets [3mm width, hardened steel with > HRC 60 hardness (through-hardened) and a special, additional surface coating with a hardness >HRC 70)] this chain sprocket is a true long-distance runner on all Rohloff gear hubs, but also in single-speed use (e.g. with the cyclepower single-speed conversion kits for SRAM® XD or Shimano® Microspline). Depending on the area of use and conditions, the service life is around 3-4x longer than the original Rohloff pinion!
the applied corrosion protection ensures particularly high durability even under conditions where other pinions have long since rusted and thus wear out prematurely
also ideal for e-bikes, where the cogis subject to higher loads
only compatible with 1/2" x 1/8" chains!
extrapolated to the mileage or durability, you not only save money directly through a longer-lasting sprocket, but also indirectly through the elimination of the work of replacing the worn cog.